Contact us now:   0402 290 290

5 Easy yet Effective Measures against Faulty Pipes

plumbercamperdown sewer shrubs

Plumbing emergencies are commonly caused by the components making up the system being faulty or not having enough maintenance that the parts and other markings start to give. Most homeowners think that minor plumbing repairs can be done in a do-it-yourself fashion. However, most times, DIY repairs take a toll on the appliance and the system. One of the most common problems is leaky pipes. Unlike other problems that desperately need the help of professional plumbers, fixing leaking pipes can often be done without the help. However, intensive care must be observed in order to make sure that the leaks are fixed. As minor as it sounds, leaks can become quite a problem if it is not taken care of properly. Water leaks can vary from the size of droplets to major gushes that can flood your home as they create puddles.

No matter the maintenance procedures that homeowners take part in, it is inevitable that the pipes will encounter leaks. Perhaps the old age or the amount of stress that the homeowners subject the pipes to will be the cause of the said problem. A good way in keeping the functions of the pipe is to know the effective countermeasures to fix the problem or, at the least, keep the damage under control:

  1.    Tightening the Joints

There may be cases when the leaks are not caused by cracks. In most cases, the problem could be caused by loose joints and other pipings that are in need of tightening to seize the dripping. Try to check the pipe fittings for loose areas. There are instances where plumbers or contractors can overlook the tightening of joints. These instances will lead to leaks obviously. Pinpoint the area and use a wrench to tighten the joint. Usually, a bolt or a screw secures the juncture. The next time a repair or an installation of pipes take place, make sure that all pipes bolts and screws are tightened securely.

  1.    Use Hose Clamps

Hose clamps can also be used to secure the leaks and to stop them. This is another DIY solution that can likely be found in the residential garages and other places. The good thing about this solution is that it is easy to come by and even easier to use. Once you pinpoint the reason and source of the leak, look for a rubber patch and a hose clamp. If you cannot get access to these items at home, feel free to purchase them from your local hardware store. Select an automotive clamp. and the first step is to track down the source of where the drip is. After, wrap the rubber tightly across the body of the leaking pipe. Use the automotive clamp as a tightening mechanism to secure the leak shut. Observe that the rubber is positioned directly above the crack or hole.

 Although useful and effective, this solution is merely a temporary fix. Eventually, the homeowners will need a permanent solution. Investing in new pipes will prove to be a wise decision.

  1.    Taping the Leak Close

This solution can only be too much use for minor cracks and pinhole leaks. Use an electrical tape to shut off the leak. Shut off the supply, use a rag to wipe away the moisture around the leak and apply the tape. Tape at least 2 inches excess from where the hole begins and ends.

  1.    Epoxy Paste Alternative

This is a popular plumber solution. In case the other 3 options fall short, another choice is to use epoxy solution. Look up the instructions for further knowledge in applying the material. Always remember to dry the areas around the rag before application.

  1.    Compound Stick Fix

If the Epoxy paste puts you in a difficult position because you do not know how to apply it, compound sticks might come handy. All there is left to do is to swab the stick across the crack or hole then leave it for a few moments to dry.