5 Factors that Can Clog Your Toilet
One of the amenities that are under appreciated most of the time is our toilet. On the other hand, like other systems, this should be taken for granted for it might create problems that affect and influences other amenities such as your sewer and piping system. One of the most common toilet dilemmas faced by homeowners is clog toilets. This kind of problem, when unnoticed, would encourage other problems from occurring. With that being said, it is important to maintain or at least known the factors that cause the issue to occur in order to know what kind of repair method you need to use.
The reason why our toilets are clogged is because of the human-causing activities. Specifically, due to people’s laziness in throwing their trash in the garbage. Instead, they flush them down the toilet. For instance, the following objects should never be flush down:
- Dental floss
- Baby diapers
- Hygienic products
- Sanitary napkins
When the problem is due to these aforementioned, it would be best to use a plunger and push the objects down the line or a close auger to pull them out.
When you are using hard water, it will definitely obstruct the rim holes of your toilet due to the minerals that this type of water carries. As they are obstructed, it will prevent the toilet from flushing down waste. Thus, when this happens, it will affect the entire operation and purpose of your toilet.
Flapper needs to be fixed
If you don’t what component this is, the flapper is a round-shaped device that is placed in the toilet tank. This is part of the toilet that is liable for the toilet to flush. Now, if your flapper is broken, it could precipitate to toilet clogs. The clog begins to occur when the flapper closes too early which decreases the power of the flush to push down the waste.
To ensure that your flapper is, indeed, damaged, take a look at the tank and inspect your flapper. When you try to flush the toilet, you’ll see at least ¾ of water within the tank is flushed down before the flapper. But, if it closes too soon, then you have to replace your flapper immediately.
Low flow flush or dual flush toilets
There are some instances that the reason why our toilets clog is because of those low-flush toilets. Low flush means that your toilet will only use half of the water to flush down you waste after using it. For traditional toilets, these toilets flush at least 3 gallons of water. Thus, low flush toilets flush and use only 1.5 gallons of water. This volume of water isn’t enough in pushing down human waste down the sewer line. With that being said, having this kind of toilet in your household would definitely result to a clog or worse, backflows.
Port holes are obstructed
The port holes are the holes you’ll see on below the rim of the toilet. Sometimes, there are instances that these holes are obstructed and to confirm if they really are, you to use a mirror and to inspect the holes. If confirmed, you can utilise sharp objects, for instance, a bent wire hanger, to poke the holes. Then, try to use muriatic acid and pour them into the overflow tube and flush it down.